PreOrder Aspire Reax Mini Kit
Aspire now brings you a great new “mini’ kit. Introducing a flexible, easy to operate and very portable kit, The Reax Mini. It comes supplied with the latest Tigon tank for convenience and ease of use, with just a few clicks of a button to change the six pre-set wattage options. It has an in-built battery for easy maintenance and charging. It comes in four super colors, Silver, Blue, Purple and Black. All have the new latest Tigon tank in complimentary colors.
The Reax Mini kit is very portable with a sleek minimalist design, it fits as easily in the pocket or purse as it does in the hand. It is very ergonomic and comfortable to hold thanks to its rounded sides and corners. With 6 easy to choose optional wattage settings and automatic bypass setting when the resistance is below 1.0 ohms, it is quite flexible for a mod of this size. Additionally the 1600mAh in-built battery should get you through a full day vaping depending on use.
Tigon tank Demensions
The easy maintenance Aspire Tigon tank is of course removable and as previously stated comes in a 2ml TPD version.
Aspire Tigon Coils
Aspire has included more flexibility in the Tigon kit by including two types of push fit coils. A 0.4ohm DTL style coil designed to run from 23-28 watts and a 1.2ohm coil designed to run at 10-12 watts more suited to MTL style vaping. Both coils are made from high grade nichrome wire, with great wicking properties for a flavorful vape. The push fit coils help reduce mess when changing and are much easier to remove and replace. The 1.2ohm coil would be suitable for nic salt type e-liquid but can equally be used with normal e-liquid.
Aspire Tigon Filling
Filling couldn’t be simpler in a child proof/leak proof tank of this type. First pull up on the top cap, then with your thumb or finger on the marker, slide open the top cap to reveal the silicon leak proof seal of the fill port. The silicon fill port on the TPD version tank has a self-sealing valve into which you can insert your chosen filling bottle nozzle to fill the tank. Closing the tank is the opposite, slide the top cap back into place covering the silicon seal and push down. Remember, when using a new coil, to let the cotton of the coil saturate in the e-liquid for 5 minutes or so before you start to vape. This will ensure that you don’t get dry hits or damage the coil.
Reax mini Mod Dimensions
The indicator light also acts as the switch (mode button) to adjust the output wattage, the bottom wattage display will light the corresponding output power value: 8W, 10W, 12W, 14W, 16W, and bypass.
Note: The output wattage can only be adjusted when the resistance of the connected coil is detected to be equal to, or higher than 1.0Ω; when the coil resistance is less than 1.0Ω, the output mode is automatically in bypass mode therefore cannot be adjusted. Note: The output wattage can only be adjusted when the resistance of the connected coil is detected to be equal to, or higher than 1.0Ω; when the coil resistance is less than 1.0Ω, the output mode is automatically in bypass mode therefore cannot be adjusted.
The Reax Mini kit comes with all the safety features that Aspire is famous for.
1* Reax Mini mod / 1* Tigon tank / 1* Glass tube / 2* Ni80 Coils (1*1.2Ω & 1*0.4Ω preinstalled) 1* Screw adjustment tool / 10* O-rings / 1* Extra drip tip / 1* USB cable / 1* User manual / 1* Warranty card